USB 3.0 is the latest interface on industrial cameras and is a great tool for a wide range of applications, mainly because it effectively reduces the bandwidth of the difference in speed between The Camera Link and the GigE interface; In addition, USB 3.0 is tailored to the latest generation of CMOS photosynthels, and the benefits of this new technology can be fully reflected in their structure and bandwidth.
The technical advantages and features of USB 3.0 industrial cameras
USB 3.0 ultra-high-speed communication protocol, up to 440Mbyte/S, built-in high-capacity frame cache for reliable and real-time transmission, USB Vision, GenICam development, compatible with HALCON, LabView and other third-party vision development software, high-performance FPGA hardware image processor, Support for a variety of image processing, reduce host CPU consumption, ultra-low delay trigger circuit design, extremely fast response to trigger signals, ultra-low power stability, typical power consumption below 2W, support Windows XP SP3 above, Linux 32/64 Bit operating system global shutter, high versatility. 213FPS ultra-high speed, very short exposure, especially suitable for high-speed running objects capture, recognition, visual positioning, industrial, agricultural, medical chemical defects and other detection. USB 3.0 industrial cameras are generally used to judge and measure in place of the human eye, so they are basically installed on machine lines. The camera converts the obtained digital image into an image signal and transmits it to the image processing system. Its main speed, compatibility and safety performance has great advantages: can be sorted high-speed moving objects, and can be fast, high-quality image data transmission and processing; At the same time, it can work continuously for a long time in poor environment, stable and reliable performance, shooting efficiency is higher.
The features of USB3.0 industrial camera are: support TWAIN and DirectShow interface, fully compatible with Windows XP (32-bit), Win7/Win8/Win8.1/Win10 (32/64-bit) operating system; digital area CCD/CMOS progressive Scanning; the maximum resolution supports multiple options such as 5480*3648, 4088*3072, 4000*3000, 3072*2048, 2448*2048, etc.; the shutter has a global/rolling shutter; the USB3.0 interface can also provide high frame rates of 20, 70 , 100, 213FPS and other options; the standard interface of the lens is optional; based on USB3.0 Vision, GenlCam development, compatible with third-party vision development software such as HALCON, LabView.
(Comparison between USB3.0 interface and industrial cameras with other interfaces)
The advantages of choosing a USB 3.0 interface ( advantage of USB3.0 industrial Cameras) are as follows:
1, High frame rate: Up to 350 MB per second of high data transfer
2, Outstanding real-time compatibility
3,more stable
4, Can be easily integrated into all image processing applications (library)
5, Reliable industrial USB3 Vision standard
6, Low CPU load
7, Low latency and low jitter
8, Screw-in plug connector
9, Integrated memory and buffer can achieve top stability in industrial applications.
10, Plug and play function
What are the advantages of high-speed industrial cameras?
1, speed real-time no compression image recording, real-time display, set speed echo;
2, the use of direct data written to the hard disk recording method, to solve the traditional memory recording method to record the problem of short time, while solving the traditional acquisition system transmission speed by the PCI bus bandwidth limitation;
3, to ensure that 100% do not lose frames, to solve the traditional memory recording methods easy to lose frames, lack of power-off protection and other issues;
4, standing work, almost do not occupy computer resources, high reliability;
5, set of systems can support multiple boards and cameras, while tracking and recording multiple targets;
6, support a variety of external signals superimposed fusion;
7, support a variety of image formats, there are a variety of hardware and software external trigger function
8, the software interface is simple, easy to secondary development and real-time processing.
USB3.0 industrial camera as a high-speed industrial camera can be the cause of high-speed movement phenomenon, motion process and motion law clearly converted imaging, compared to the ordinary industrial camera has an absolute advantage
Finally Vehviscam manufacture limited official website www.Vehviscam ( support 10 languages) provide various kinds of machine vision lens for USB3.0 industrial cameras, welcome to view online and find interesting models for your cameras well
